DIGIPRO ELECTRONIC LABS
is very proud to introduce our newest line of
heavy duty, lab grade and approved Colloidal Production
DIGIPRO™ CUSTOM BUILT TO ORDER
PROFESSIONAL SERIES
DIGIPRO™ Rack Mounted or
Desk top Pro-Series
Colloidal Production Systems
3 New Models
PS1000 Industry Standard Ionic LVDC System
PS1500 Nano Particulate HVAC System
PS2000 LVDC/HVAC Combo System
(Each model slightly varies from unit pictured
above)
NOBODY ON EARTH make a Professional Grade
Rack Mount Colloidal Manufacturing system like us!
All three models have the following in
common
CERTIFIED MODULES
Fully
UL and Medical Lab certified IEC modules, parts with full UL 2161 ground fault, anti-shock safety
circuitry built-in
105-125 VAC 50-60hz auto adjusting input for use in North America, Japan and
Mexico. Other International voltages are available as an additional option..
Power Conscious
- with very tiny carbon footprint
ECO FRIENDLY ultra low power consumption modules. These system
modules cost less to
run and have almost a 91% efficiency rating. Total system under full
operation only takes 3.68 amps and under 300 watts under normal operation.
Some units can also be outfitted for
100% Solar Panel outback field use.
Industrial -
Professional Grade
Vented 19" Industrial rack mount standard, includes CFM fans for long life
of internal modules
Multiple output ports, some with DENSITY BATCH modes to match different
changes colloidal production variables.
Multi
Channel-Port adjustable density outputs
LVDC ports can make a maximum of TWO,
FOUR or EIGHT
thirty-two ounce (quart) or metric (1000 ml) batches at once or a
combination of HVAC and LVDC batches simultaneously (see model for more
info)
Latest
Scientific Published 76 pa Colloidal Producers Guide with each system
All Models include our Version 2010 156 Page scientific 'Colloidal LVDC-HVAC
Production Book'
Industry
Standard Jacks & Accessory Ports for easy filed upgrades
UL listed red/black high voltage lead set (18-24" long) with banana jacks
and electrode holding alligator clamps
Certified &
Assayed .9999 Pure Electrodes Included
.9999 Silver electrode pair for each port .9999 Copper electrode pair for
each port (where applicable)
Optional
Colloidal Production Accessories for Lab or Field use
Optional
Single, Dual or fully individual industrial Diehl 0-60 minute batch
production channel timers with auto shut-off and depends on model. Each
timer runs up to 4 channels or ports at once. Individual 0-60 port/channel
timers are also available.
Optional Air pumps, clamps and batch glass pipettes insertion tubes.
Optional Gold, Zinc and Magnesium electrodes *making futuristic minerals is
done so at your own risk. Even though we includes guides, books, or
paperwork with our systems, PAC ORG LABS makes no guarantee that you will be
able to use our equipment to produce futuristic minerals. Optional QPC-32 batch beaker
brew containers with electrode holders
Optional Stackable lead sets can DOUBLE
YOUR CAPACITY, form 8 channels to 16 on certain modules!
IF YOU ARE A MEDICAL LAB, BUSINESS OR NEW
COLLOIDAL PRODUCER or a INTERNATIONAL CUSTOMER?
Model Facts
Specs subject to change without
notice, front panel layouts may differ from pictures above.
PS1000 LVDC Industry Standard Ionic
Production Unit
This model can be rack or desk mounted and comes
with large rubber feet for desk top or counter lab use.
The PS1000 has an 8 port output. Each port is
density switchable allowing you to make up to 32 ounces or 1000 ml's per
batch, per hour of 8-10 ppm of industry standard ionic Colloidal Silver, in
the crystal clear range and with a particle size estimated below .05 microns
respectively. Ports can be mixed and matched for different kinds of
colloidal minerals all simultaneously.
PS1000 CAPABILITIES
This unit is capable of making EIGHT LITERS or 2
GALLONS of Colloidal Product per hour
PS1000 can make Ionic Colloidal Copper, Silver,
Zinc, Magnesium, and possibly even other futuristic colloidal supplements
Dual density port switching 33.3 VDC constant
current regulated at 5ma and in low density mode is 15 VDC @ 25 ma for
colloidal copper and zinc batches. The ports can be chained using optional
chainable lead sets to make double 1000 ml batches or up to 16 liters per
hour.
ORDERING A PS1000
The PS1000 is a special ordered unit and are
custom built and tested per order. This allows Medical Labs and Producers
the ability to order Installed Modules and Options of their choice and also
to order un its that operate on special International Electrical Grids and
or alternative, solar power grids for remote lab use. They require two full
weeks of in-house build and testing and 4-7 days UPS Ground delivery CONUS.
Rack Weight on the PS1000 is 44 lbs.
PS1000 Deluxe Kit, comes with eight heavy duty
lead sets (non stackable). Eight sets of .9999 Silver Electrodes and eight
sets of .9997 copper electrodes. One Hanna TDS Meter for pre and post batch
testing. Price does not include shipping, insurance, trans fees or handling
charges ( figure ship rates at 50 lb box rate from 97005. We normally
ship UPS ground. We have air mailed these to EUROPE, GERMANY, FRANCE and
South Africa.
PS1000 Deluxe Medical Lab/Producers
Custom built to Order from $1099.00 and up.
EMAIL US
TO GET A DISCOUNTED FULL SYSTEM QUOTE
PS1000 Deluxe w/ 16 LEAD SET OUTPUT -adds
EXTRA 8 stackable lead set upgrade
Custom built to Order from $1175.00 and up.
EMAIL US
TO GET A DISCOUNTED FULL SYSTEM QUOTE
THE PS1000
operates off 105-240 VAC 50/60 HZ input right out of the box! No
International Voltage option needed!
PS1000 Options:
Package of (eight) QPC-32 1000ml (quart)
production Tri-Pour Plastic lab beakers with 5 way electrode binding posts
$200.00
Stackable Lead sets (eight pack) Allows you to
stack multiple batches per port, so you can make 16 1000ml batches
simultaneously $80.00
Pack of (two) 120 VAC only Aeration Pumps.
Includes tees/tubing and eight 6" Glass Insertion Pipette tubes/container
clamps $60.00
PS1500 HVAC ONLY Industry Standard Nano-Particulate Colloidal Production Unit
The PS1500 (and PS-2000) are ONLY sold to
advanced and trained Colloidal Producers and Lab technicians because of this
devices high voltage output, you will be required to submit a signed
liability waiver to purchase this device.
This model can be rack or desk mounted and comes
with large rubber feet for desk top or counter lab use.
WARNING ABOUT THE HIGH VOLTAGE OUTPUTS:
Unlike LVDC units, the PS-1500 and PS-2000 use
high voltage outputs and lead sets. High voltage lead sets are rated at 15
kv and should never be used with low voltage connectors, sockets or banana
jacks due to HV's inherent arcing and corona problems, these units use
permanently mounted 18" HV lead sets and alligator clamps for daily use.
Using banana jacks and sockets will short out onto any chassis the PS-1500
or PS-200 is built into.
The PS1500 come with only ONE HVAC output. These
can sometimes be chained to multiple TSM HV batches in the field, however,
we only allow one HV port at a time to be built into our systems. ARC
EXPERIMENTS cannot be chained. Only one power supply output port must be
used for ARC experiments. ARC experiments are done at your own risk. There
is no guaranty that the newer ARC production method will make or use any
colloidal minerals other than our advertised silver, copper and nanogold.
Some options for larger producers do include more
lead sets, up to two
two VERY HIGH VOLATGE (hot/live) 15 kv lead sets. If you use this option of
2 or 4 lead sets, you must make two or more batches simultaneously so as not
to be shocked or cause arcing problems during batch progression. Each lead
set is HOT when the unit is powered onto the HVAC Mode, we cannot
control separate HVAC lead set outputs unless you opts to purchase all
separate HV modules, which add $500.00 per unit, per port.. To produce only
one HV batch at a time, some users purchase a rubber matt to clip on the
unused HOT lead set when only one beaker at a time is being brewed.
The PS1500 can make up to 32 ounces or 1000 mls per batch, per port, per
hour of 5 -10 ppm of industry NANOSILVER, NANOCOPPER, NANOZINC and when used in
single port output mode, 2-to about 10 ppm (depends on user/method and SLP
Effect) NANOGOLD (using our Plasma Underwater Arc method
and optional arc bar accessories).
PS1500 CAPABILITIES
This unit is capable of producing up to One
1000 ml or 32 ounce batch of Colloidal Product per hour (gold excluded). The PS1500
can make NANO PARTICULATE Colloidal Copper, Silver, Zinc, Magnesium, and
other futuristic colloidal supplements (*not guartanteed to produce) using our TSM (total submersion
method). The PS1500's output is auto adjusted from 7.5 kilovolt @ 1 ma
up to 12 kilovolt @ 30 ma full power. At full power, the PS1500 only draws
1.95 AMPS (about one third less than the standard vacuum cleaner). The
PS1500 (using the TSM method) will make a 6-10 ppm crystal clear and
pristine, nano colloidal particle in the < 25 nm size category respectively.
Your lab results may vary slightly due to SLP effect and local lab waters
and conditions. Options include One 60 or 120 0-120 minute auto shut off
batch timer. Controls entire system (all for ports) at one time.
ORDERING A PS1500
The PS1500 is a special ordered unit and are
custom built and tested per order. This allows Medical Labs and Producers
the ability to order additional HVAC Modules and Options of their choice and also
to order un its that operate on special International Electrical Grids and
or alternative, solar power grids for remote lab use. They require two full
weeks of in-house build and testing and 4-7 days UPS Ground delivery CONUS.
This device requires a
signed
waiver to be downloaded and printed out and mailed to us before we can
even ACCEPT or ship your order. No Deposits allowed on these items, to get yours in line,
you need to purchase with the full cost on the shopping cart. Rack Weight on
the PS1500 is 55 lbs plus accessories box which may be shipped separately in another
12 pound box. A 220 Volt option adds 5 pounds. Universal and International
120-220 50/60 hz out board power line convertor is available: 120/220 Up or
down 500 Eco-Friendly convertor power supply adds 15 pounds and is optional at
$150.00 and up.
PS1500 Deluxe Medical Lab/Production Unit
priced from $1375.00 and up
Includes one HV port and 18-24" HV Cables/clip for any qpc
PS1500 Options:
Additional Separate Ports $500.00
each (include separate timers and lead sets per each)
QPC-32 1000ml (quart)
production Tri-Pour Plastic lab beaker with 5 way electrode binding posts
from $25.00
Pack of (one) 120 VAC only Aeration Pump.
Includes tees/tubing and TWO 6" Glass Insertion Pipette tubes/container
clamps from $40.00
PS-1500 and PS-2000's all operate off 105-125 VAC only, for international
use, see below.
PS1500 500 watt all world electrical grid up/down stabilizer, power
convertor from $150.00
PS2000 COMBO UNIT LVDC
& HVAC Industry Standard Nano-Particulate Colloidal Production Unit
The PS2000 is only sold to
advanced and trained Colloidal Producers and Lab technicians because of this
devices high voltage output, you will be required to submit a signed
liability waiver to purchase this device.
This model can be rack or desk mounted and comes
with large rubber feet for desk top or counter lab use. The PS2000 has a 2
LVDC outputs and 2 HVAC outputs. Each port is auto adjusting for batch
density and conductivity. The PS2000 can make up to 32 ounces or 1000 mls
per batch, per port, per hour of 5-10 ppm of industry NANOSILVER,
NANOCOPPER, NANOZINC or LVDC IONIC products all simultaneously and
NANOGOLD (using our HVAC Plasma Underwater Arc method).
PS2000 CAPABILITIES
This unit is capable of making TWO LITERS or 1/2
GALLON of Colloidal Product per hour (gold excluded). The PS2000 can make
NANO PARTICULATE or IONIC or BOTH; Colloidal Copper, Silver, Zinc,
Magnesium, and possibly other futuristic colloidal supplements using our TSM (total
submersion method). PS2000's output is auto adjusting from 7.5
kilovolt @ 1 ma up to 12 kilovolt @ 30 ma full power. At full power, the
PS2000 only draws 3.00 AMPS (about one third less than the standard vacuum
cleaner). The PS2000 (using the TSM method) will make a 6-10 ppm crystal
clear and pristine, nano colloidal particle in the < 25 nm size category
respectively and/or IONIC products in the under .05 micron range.. Your lab
results may vary slightly due to SLP effect and local lab waters and
conditions.
ORDERING A PS2000
The PS2000 is a special ordered unit and are
custom built and tested per order. This allows Medical Labs and Producers
the ability to order Installed Modules and Options of their choice and also
to order un its that operate on special International Electrical Grids and
or alternative, solar power grids for remote lab use. They require two full
weeks of in-house build and testing and 4-7 days UPS Ground delivery CONUS.
This device requires a
signed
waiver to be downloaded and printed out and mailed to us before we can
even ACCEPT or ship your order. No Deposits allowed on these items, to get yours in line,
you need to purchase with the full cost on the shopping cart. Rack Weight on
the PS2000 is 59 lbs plus accessories may be shipped separately in another
12 pound box.. 220 Volt option adds 5 pounds. Universal and International
120-220 50/60 hz out board power line convertor is available: 120/220 Up or
down 1000 watt line convertor power supply adds 15 pounds and is optional at
$150.00 and up.
PS2000 Deluxe Medical Lab/Producers
Price from $1750.00
EMAIL US
TO GET A DISCOUNTED FULL SYSTEM QUOTE
PS2000 Options:
Package of (two) QPC-32 1000ml (quart)
production Tri-Pour Plastic lab beakers with 5 way electrode binding posts
from $50.00
Pack of (one) 120 VAC only Aeration Pump.
Includes tees/tubing and TWO 6" Glass Insertion Pipette tubes/container
clamps from $40.00
205-250 Volt Option add $225
SPECIAL CUSTOM BUILD TIME FOR THE PS-1000, PS-1500 and PS-2000 requires 2 to
3 weeks in shop build & test time prior to shipping. Systems can weigh up to
59 pounds each, so expect very high shipping/delivery costs. Please write us
for a free system quote, along with a really close estimate of the shipping
cost to your address. Please tell us what Country, City and Postal Code you
want the system to be delivered to, before we can make you an accurate
quote.
If you would like a discount on a multiple bank of the already available
NST-120 or the International Version of the NST-220, please let us know. We
can sell you multiple redundant NST units that can equal or exceed the power
of a single PS-1500/PS-2000 Check out the NST series by clicking here.
NST PAGE
